The eDrive™ Nitro integrates a standard eDrive with optional power supplies, RF drivers and other accessories all in one compact, rack-mounted housing. All aspects of your laser system can be controlled with one unit. It can be configured for driving diodes in either CW or QCW operating modes.
The eDrive Nitro is equipped with multiple control options. An easy to use local front panel interface along with a host of digital remote control options (including compatibility with Labview*) are offered as standard.
The eDrive Nitro has been designed to maximize reliability. All system components are conservatively rated. High power circuits are physically separated from low power circuits. Minimal internal interconnect wiring reduces the risk of failure.
A variety of power supplies, single or dual-axis Q-switch drivers/controllers, temperature controller options are available and can be integrated into the Nitro. Ask your sales representative for more information.
|
Air Cooled |
Water Cooled |
|
CW |
QCW |
QCW-HC |
CW |
QCW |
QCW-HC |
| Amplitude: |
Output
Current |
50 A |
100 A
@ 30% DC |
300 A
@ 80% DC |
70 A |
100 A
@ 70% DC |
300 A
@ 15% DC |
Display
Resolution |
100 mA |
100 mA |
| Accuracy |
± 2% |
± 2% |
| Noise |
< 50 mA p-p |
< 50 mA p-p |
| Pulse Rate: |
| Range |
----- |
0 - 50 kHz |
----- |
50 kHz |
Display
Resolution
(1 Hz)
(10 Hz)
(100 Hz)
|
-----
-----
----- |
0- 100 Hz
100 - 1 kHz
1 - 50 kHz |
-----
-----
----- |
0- 100 Hz
100 - 1 kHz
1 - 50 kHz |
| Accuracy |
----- |
± 2% |
----- |
± 2% |
| Pulse Width: |
| Range |
----- |
10 µs 500 ms |
----- |
10 µs 500 ms |
Display
Resolution |
----- |
100 ns |
----- |
100 ns |
| Transition Time |
----- |
5 µs typical |
----- |
5 µs typical |
| Trigger In: |
| Type |
----- |
Positive edge triggered |
----- |
Positive edge triggered |
| Signal Input |
----- |
TTL or 5 V CMOS |
----- |
TTL or 5 V CMOS |
Minimum
Width |
----- |
50 µs |
----- |
50 µs |
Input
Impedance |
----- |
50 Ω |
----- |
50 Ω |
| Compliance: |
| Compliance V |
0 - 350 V |
0 - 350 V |
Display
Resolutuion |
0.1V |
0.1V |
| Accuracy |
± 2% |
± 2% | |
Interlocks:
- Emergency Off
- Keylock Switch
- External BNC - open circuit to halt
- Chiller water level
- Chiller over temperature
* Labview™ is the property of National Instruments Corporation.
|
Cutting Edge Optronics
